EVALUASI KUALITAS PRODUK HASIL OLAHAN DAGING SAPI PADA DEPOT DAGING SAPI SARI ECCO
Keywords:
Quality Control, Supervision, Control Chart, Ishikawa DiagramAbstract
The existence of competition with competitors makes the company to make products that are superior to other competitors . For this reason, there is a need for quality supervision or quality control. Quality control is needed in the supervision of the production of each company to reduce the number of defective products that can be caused then the product can be identified and known whether the product produced is in a controlled state or not. The purpose of this study was to analyze the quality of the products produced is still within the limits of quality standards , and to analyze the factors that cause the quality is not in accordance with quality standards. From the analysis using Control Charts based on X-Chart analysis, it was concluded that tofu meatballs have not met the requirements when viewed from the company standard of 5 %. From the measurement of weight (g) has a discrepancy of 39.74% or above 5%, and from the measurement of Volume has a discrepancy of 44.47% or above 5%. With the ishikawa diagram, it can be seen that the cause is caused by human factors, the environment, raw materials, production tools
References
Arianti, M. S., Rahmawati, E., & Prihatiningrum, R. R. Y. (2020). Analisis pengendalian kualitas produk dengan menggunakan statistical quality control (SQC) pada usaha amplang karya bahari di Samarinda. Jurnal Bisnis dan Pembangunan, 9(2), 1-13.
Andespa, I. (2020). Analisis Pengendalian Mutu Dengan Menggunakan Statistical Quality Control (SQC) Pada PT. PRATAMA ABADI INDUSTRI (JX) SUKABUMI. E-Jurnal Ekonomi dan Bisnis Universitas Udayana, 9(2), 129- 160.
Assauri, S. (1993). Manajemen Produksi. Jakarta: Lembaga Penelitian Fakultas Ekonomi UI.
Assauri, S. (1999). Manajemen Produksi dan Operasi: Edisi Revisi. Jakarta: Fakultas. Ekonomi Universitas Indonesia.
Bahar, B. (2003). Memilih Produk DagingSapi. Gramedia, Jakarta.
Hadiat, D. A., Handarto, & Nurjanah, S. (2020). Analisis Pengendalian Mutu Produk Tempe Menggunakan Statistical Quality Control (SQC) di Industri Rumah Tangga Yayah Komariah Majalengka. SENTER 2019, 376-387.
Harsono, M . (2010). Manajemen Pengantar, Yogyakarta : Sekolah Tinggi Ilmu Komunikasi YKPN.
Mulyono, K., & Apriyani, Y. (2021). Analisis Pengendalian Kualitas Produk BRA Dengan Metode SQC (Statistical Quality Control). JENIUS: Jurnal Terapan Teknik Industri, 2(1), 41-50.
Rahayu, P., & Supono, J. (2020). Analisis Pengendalian Kualitas Produk Menggunakan Metode Statistical Quality Control (SQC) Pada Divisi Curing Plant di PT.GAJAH TUNGGAL,Tbk. JURNAL TEKNIK: Universitas Muhammadiyah Tangerang, 9(1), 81-91.
Render, B., & Heizer, J. (2001). Prinsip-Prinsip Manajemen Operasi (terj). Edisi Pertama, Jakarta: Salemba.
Reksohadiprodjo, S. (1997). Manajemen Produksi. Edisi IV. Cetakan V. Penerbit BPFE. Yogyakarta.
Siagian, Sondang P. (2003). Teori & praktek kepemimpinan. Jakarta: Rineka Cipta.
Suryatman, T. H., Kosim, M. E., & Julaeha, S. (2020). Pengendalian Kualitas Produk Roma Sandwich Menggunakan Metode Statistical Quality Control (SQC) Dalam Upaya Menurunkan Reject di Bagian Packing. JOURNAL INDUSTRIAL MANUFACTURING, 5(1), 1-12.
Winardi. (1990), Asas-asas Manajemen, Edisi Terbaru, Bandung: Mandar Maju.
Winarno, F.G. (2004). Kimia Pangan dan Gizi. Gramedia Pustaka Utama. Jakarta.
Yamit, Z. (1998), Manajemen Produksi dan Operasi, Yogyakarta: Fakultas Ekonomi UII.
Yamit, Z. (2001). Manajemen Kualitas Produk dan Jasa Edisi Pertama. Yogyakarta: Ekonisia.
Yamit, Z. (2005). Manajemen Kualitas Produk Dan Jasa, Edisi Pertama. Yogyakarta: Ekonisia, Kampus Fakultas Ekonomi UII.
